Key Features
◆ Comply with Bluetooth 1.2 , 2.0 , 2.1 , 3.0+HS , 4.0 , 5.0 , 5.2 core specifications
◆ RF measurements via the Bluetooth SIG standard
◆ Support 9 basic rates , 6 EDR test cases , and 24 Bluetooth low energy BLE test cases
◆ The test RF performance of the Bluetooth module is under 5 seconds
◆ Software provides graphical traces for modulation, power ramps, individual channel measurements, and receiver sensitivity searches
◆ Built-in support for Bluetooth low energy 2 -wire control interface
◆ Support device port initialization and run test via GPIB , USB and UARTHCI control
Performance
| Equipment performance | ||
| Number of channels | single channel | |
| Program control interface | GPIB/USB | |
| Test mode | Stand. Null Packet. Single payload | |
| Transmitter test project | Output power, power control, modulation characteristics, initial frequency offset, frequency | |
| Receiver test project | Drift single slot sensitivity, multi-slot sensitivity, maximum output level | |
| Output maximum power | 0dBm | |
| Bluetooth Core Specification | 1.2、2.0、2.1、3.0+HS、4.0、4.1、4.2、5.0、 5.1、5.2 | |
| Signal generator | ||
| working frequency | Frequency Range | 2.4GHz ~ 2.5GHz |
| frequency resolution | 1kHz | |
| Frequency Accuracy | ±500Hz | |
| level | Amplitude range | 0dBm ~ -90dBm |
| Amplitude Accuracy | ±1dB (0dBm ~ -80dBm) | |
| Amplitude Resolution | ±0.1dB | |
| output impedance | 50ohms | |
| Output standingwave ratio | 1.5:1 (usually 1.3) | |
| GFSK modulator | debug index | 0.25 ~ 0.50 ( 125kHz ~ 250kHz) |
| Debug index resolution | 5.0Vpp±10%, 110ohm | |
| Debug Exponential Precision | of the modulation index ( nominal value) = 0.32 | |
| baseband filter | BT = 0.5 | |
| π/4 DQPSK modulator | Modulation Index Accuracy | <5% RMS DEVM |
| baseband filter | BT = 0.4 | |
| measuring receiver | ||
| working frequency | Frequency Range | 2.4GHz ~ 2.5GHz |
| frequency resolution | 1kHz | |
| Frequency Accuracy | ±500Hz | |
| level | Measuring range | +22dBm ~ -55dBm |
| Power Measurement Accuracy | ±1dB (+20dBm ~ - 35dBm) | |
| Output VSWR | 1.5 : 1 | |
| Damage level | +25dBm | |
| resolution | 0.1dB | |
| GFSK modulator | Deviation measurement range | 0 ~ 350kHz peak |
| precision | Modulation index 1% =0.32 | |
| Instrument Specifications | ||
| temperature and humidity | 0°C ~ +40°C , ≤ 80%RH | |
| power supply | 85 ~ 260 volts AC | |
| Dimensions | 380mmX360mmX85mm | |
| Weight | 4.4 kg | |